Electrical Box EMF's

Is Your Circuit Breaker Box an EMF Hazard?

All the electricity that comes into your home enters via your Electrical or Circuit Breaker box. This makes your circuit breaker box an EMF hot-spot.

Because the Electrical Box is the source of incoming electricity into your home, it is a great place to start clearing EMFs. Clearing EMFs where they enter results in cleaner frequencies running through your walls.

Many homes have the Electrical or Fuse Box in a remote location like the garage or basement, while others have the electrical box in a frequently used room like a bedroom or kitchen.

In both cases, clearing the Circuit Breaker Box is an important step to reducing EMF exposure for you and your family.

Sleeping near a Circuit Breaker Box has been linked to many health problems. If your bedroom has an Electrical Box, we recommend moving the bed as far away from the Box as possible. And you definitely don’t want a circuit breaker box anywhere near a baby’s crib or a kid’s bed.

What’s tricky about Electrical Boxes, is you’ve got to keep in mind what’s on the other side of the wall from them. The Box might not be in the kids’ room, but if it’s in the hall and shares a wall with the kids’ room, it’s just as bad. The concentrated EMFs from the Box emanate in all directions.

If your Box is in a room that you sleep in, or just spend a lot of time in, you definitely want to clear it.

By clearing the Circuit Breaker Box, you’re helping to harmonize all the electrical frequencies running through the wiring in the walls of your home. A lot of Feng Shui Practitioners recommend clearing the Electrical Box for this reason.

How To Clear A Circuit Breaker Box

How to clear an Electrical Box is dependent on the location of the Box and how it is placed.

If your Electrical Box is in a garage or basement, this means the electricity is entering your Box either from above or from below. You can discern which direction from locating the pipe bringing the electricity in. If the pipe is entering the Box from above, then this is the direction the electricity in entering from. If the pipe is entering from below, then the electricity is entering from below.

To properly clear a Box that is in a garage or basement and has a pipe entering it, you want to use the Tri-Pak. The Tri-Pak should be affixed to the front door of the Box. If the electricity is entering from above, when placing the Pak, you want to position it so the long edge/base of the Pak is aiming up towards the entering electricity.

If the pipe bringing the electricity is entering from underneath the Box, you want to position the Tri-Pak on the front of the door of the Box with its long edge/base aiming down towards the pipe.

The Tri-Pak has adhesive on the back, so just peel and stick!

If the Circuit Breaker Box is not in a basement or garage but is instead positioned in one of the rooms or hallways of the living space flush into the wall, then we recommend using the G-33 to clear it.

If the Box is placed in the living space and is flush into a wall, the electricity is actually entering the Box not from above or below, but from behind. The G-33 clears this EMF field beautifully, as it is not a directional Resonator like the Tri-Pak but a spot-clearing Resonator.

The G-33 can be placed on the center of the door of the Box. It has adhesive on the back, so just peel and stick!